Sale!
Argonide NanoCeram® Filter (10-inch, 0.2 micron)
Original price was: $52.99.$43.95Current price is: $43.95.
| Specifications for the Argonide NanoCeram® Filter | |
| Product Website | NanoCeram |
| Filter Size | 9.75” x 2.5“ |
| Pore Size (Absolute) | 0.2-micron |
| Material | Pleated Electropositive media |
| Capacity* | Up to 5000 gallons |
| Flow Rate | 4 GPM |
| Contaminants Removed/Reduced | Cysts (giardia, cryptosporidium) Pathogenic bacteria Virus Endotoxins Particulates |
| Additional Information | • >99.99% Efficiency at 0.2 microns (latex spheres) • >3 LRV Cyst Retention • >5 LRV Klebsiella terrigena Retention • <0.01 NTU until Terminal ∆P: 35 psid (2.4 bar) • Dirt Holding Capacity: 82 g/ft² • Superior to microglass, meltblown, and membrane media. • >99.95% Endotoxin Removal |
* Based on average municipal water quality
Out of stock
Related Products
-
Set of 4 Sediment Filters (10-inch, 1 micron)
Original price was: $15.99.$12.95Current price is: $12.95. -
AquaCera CeraMetix Filter (10-inch, 0.5 micron)
Original price was: $79.99.$59.95Current price is: $59.95. -
Activated Carbon Block Filter (10-inch, 5 micron)
Original price was: $15.99.$11.95Current price is: $11.95. -
Set of 4 Activated Carbon Block Filters (10-inch)
Original price was: $67.96.$44.95Current price is: $44.95. -
Set of 1 Sediment and 1 Activated Carbon Block Filters (10-inch)
Original price was: $15.99.$14.95Current price is: $14.95. -
AquaMetix Filter (10-inch, 5 micron)
Original price was: $79.99.$69.95Current price is: $69.95. -
AquaCera Imperial CeraSyl Ceramic Filter (10-inch, 0.5 micron)
Original price was: $39.99.$33.95Current price is: $33.95. -
Argonide NanoCeram® PAC Filter (5-inch, 0.2 micron)
Original price was: $43.99.$36.95Current price is: $36.95. -
Argonide NanoCeram® PAC Filter (10-inch, 0.2 micron)
Original price was: $54.99.$45.95Current price is: $45.95.
Out of stock
Argonide NanoCeram® characteristics
- Uses NASA-derived technology that employs electropositive attraction vs simple pore size sieving to rapidly adsorb particles as large as tens of microns or as small as a few nanometers.
- NSF/ANSI 42 and 53 certified filter that combines high particle removal efficiency as well as high dirt holding capacity.
- Pleated filter design achieves an absolute rating of 0.2 microns yet the flow through the 2.5” x 10” filter is up to 10 gpm at an initial pressure drop less than 2 psi.
- Water with high turbidity should be treated to remove particulate using sedimentation, and prefiltering to minimize premature clogging of the NanoCeram® filter.
- NanoCeram® filter should be removed from housing and allowed to dry between uses if longer than 72 hours. The first several gallons of water pumped should be discarded upon initial and reuse of the filter
Additional information
| Weight | .7 lbs |
|---|---|
| Dimensions | 12 × 6 × 4 in |
