Argonide PAC2.5-10 AG 2.5X10 NanoCeram Pleated PAC Filter

$39.99

In stock

Specifications for NanoCeram PAC Filter
Filter Size 9.75” x 2.5 “
Pore Size .2-micron absolute
Material Pleated Electropositive media with activated carbon powder
Capacity* Up to 5000 gallons
Flow Rate 4 GPM
Contaminants Removed/Reduced Cysts (giardia, cryptosporidium)
Pathogenic bacteria
Virus
Bromine
Chlorine
Chromium VI
Endotoxins
Ferric Iron
Iodine
Lead
Particulates
Trace Pharmaceuticals
VOC

*Based on average municipal water quality

Description

NanoCeram PAC characteristics

  • Uses NASA-derived technology that employs electropositive attraction vs simple pore size sieving to rapidly adsorb particles as large as tens of microns or as small as a few nanometers.
  • NSF/ANSI 42 and 53 certified filter that combines high particle removal efficiency as well as high dirt holding capacity.
  • Pleated filter design achieves an absolute rating of 0.2 microns yet the flow through the 2.5” x 10” filter is up to 10 gpm at an initial pressure drop less than 2 psi.
  • The NanoCeram PAC filter incorporates activated carbon particles in the pleated matrix to also remove contaminants including chlorine, iodine and soluble organics that may be highly toxic or may cause unpleasant taste or odor.
  • Water with high turbidity should be treated to remove particulate using sedimentation, and prefiltering to minimize premature clogging of the NanoCeram filter.
  • NanoCeram filter should be removed from housing and allowed to dry between uses if longer than 72 hours. The first several gallons of water pumped should be discarded upon initial and reuse of the filter.

Additional information

Weight 0.28125 lbs
Dimensions 10 × 3 × 3 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.